pauls trailer NB MX5 rear cut

by **PAU61L** » Sun Jan 29, 2012 9:22 pm

I am thinking that would be the way to go, I will get some more work done before i get there, thanks lightyear, Paul

by **PAU61L** » Thu Feb 02, 2012 8:34 pm

Just a quick pic of what it will look like, chassis bolted to body, front bumper bar will be painted, still have to sort out transition from front bumper bar to rear cut, Paul

by **Hammer** » Fri Feb 03, 2012 5:06 pm

Looking good Paul. Can't wait to take a closer look at the next track day.

Although it looks like someone's broken into it already. See all the broken glass on the road. :mrgreen:

by **Okibi** » Fri Feb 03, 2012 5:42 pm

Looks good, i've been wanting to make one of these for years.

MX-5 trailer will also get you bonus points at show n shines :lol:

by **PAU61L** » Sun Mar 18, 2012 9:33 am

Hello everyone, been cutting off more steel, getting two front guards, cut into rear guard, going to panel beaters tomorrow. Also putting front bumper bar on, then have to build floor and paint, hopefully finished before Natmeet, Paul.

by **Okibi** » Sun Mar 18, 2012 11:59 am

Should look so cool.

Always wanted to build one of these.

by **PAU61L** » Sat May 05, 2012 10:14 pm

Since the "MX5" trailer wasn't going to be ready for Natmeet, I got this trailer sprayed in Sunlight silver, just to bring the extra stuff, Paul.

by **Okibi** » Thu May 31, 2012 12:10 am

Any progress? :mrgreen:

by **Veloce** » Thu May 31, 2012 9:15 am

Needs a rear wing to add high speed stability! :lol:

I'd love one of those, tho' for an NA!

by **PAU61L** » Tue Jun 19, 2012 10:38 pm

Hello everyone, still a bit of a mess, front guards joined onto back, and bogged in, front bumper bar on, should be sanded and sealed this weekend, then I will finish off the floor and figure out the rest of it, Paul.

by **Okibi** » Wed Jun 20, 2012 12:27 am

Very cool

by **PAU61L** » Sun Jul 01, 2012 10:05 pm

Hello everyone, got the trailer back from the panel beaters, still a lot of work to do, floor to build, fixed front bumper to guards and chassis, then trying to figure out how to fill in the hole, then I made some spines the same profile and attached ply to it, now to figure out hinges, I will put the bulge in it, the same as the bonnet, I will get it fibreglassed and painted. I couldn't use a bonnet, because the gap is wider, also need to find headlight protectors to put in for headlights.
Paul

by **alexpav** » Wed Jul 11, 2012 1:44 am

This is the greatest thing ever! I have absolutely no use for it, but i want it! keep posting

by **Gladiator** » Sat Jul 28, 2012 2:36 pm

Very cool. Subscribed.

by **PAU61L** » Thu Sep 13, 2012 10:46 am

hello everyone, still some work to do, I took it to the NSW Presidents picnic last Sunday,
will post more after some more panel work and paint.
CAUTION do not try this at home, it has taken a lot of time, Paul.