EOI: COPS Brackets GB

by **geofiz** » Fri Jul 06, 2012 12:42 am

BOYRCR wrote:1. zoomzoom
2. droo
3. Bear's in NB8B
4. Magpie
5. rascal
6. Sailaholic
7. Plohl
8. Zcootz
9. saboteur
10. saboteur
11. GM
12. Tedsmx5
13. Hamx5ter
14. sean
15. Fattima
16. 16bit
17. manga_blue
18. A.Chen89
19. Okibi
20. RX-747
21. BOYRCR
22. geofiz

1.6 COP Plate Kit
1. gslender
2.Toppertee
3.Christolo
4. CapitalF
5. Noddi85
6. Mr Nanotech
7. MxCase
8. mrpham
9. StillIC
10. Muzdaman
11. spikes
12. Stingray

Looks like I dropped of the list :cry:

by **CapitalF** » Tue Jul 24, 2012 10:18 pm

This is looking popular. What's the next step?

by **jerrah** » Tue Jul 24, 2012 10:43 pm

Note for those using the 'generic' coils. I have a set of the ebay ones and one has failed within 1000km.

I've called a few wreckers and genuine 2nd hand Toyota ones seem pretty easy to get around the $100 mark.

Toyota/Denso part numbers:

90080-19015
90919-02239
90080-19023
90919-02234

by **Mr nanotech** » Wed Jul 25, 2012 12:31 am

Any idea when things start happening? No hurry, just curious.

by **Keith** » Wed Jul 25, 2012 4:16 am

[quote="geofiz"][quote="BOYRCR"]1. zoomzoom
2. droo
3. Bear's in NB8B
4. Magpie
5. rascal
6. Sailaholic
7. Plohl
8. Zcootz
9. saboteur
10. saboteur
11. GM
12. Tedsmx5
13. Hamx5ter
14. sean
15. Fattima
16. 16bit
17. manga_blue
18. A.Chen89
19. Okibi
20. RX-747
21. BOYRCR
22. geofiz
23. Keith

1.6 COP Plate Kit

1. gslender
2.Toppertee
3.Christolo
4. CapitalF
5. Noddi85
6. Mr Nanotech
7. MxCase
8. mrpham
9. StillIC
10. Muzdaman
11. spikes
12. Stingray

by **gslender** » Wed Jul 25, 2012 8:22 am

Mr nanotech wrote:Any idea when things start happening? No hurry, just curious.

Me too. I took mine off the other week and I forgot how weak and flimsy they are. I cringed putting them back on, and will be nice to replace them with something like this that sounds like they'll be made properly!

G

by **noddi85** » Wed Jul 25, 2012 5:57 pm

gslender wrote:
Mr nanotech wrote:Any idea when things start happening? No hurry, just curious.

Me too. I took mine off the other week and I forgot how weak and flimsy they are. I cringed putting them back on, and will be nice to replace them with something like this that sounds like they'll be made properly!

G

Motor is not getting built in a hurry.
This is still on the list of things I would like before nearing the end though.
Same as above
Cheers

by **zoomzoom** » Sat Jul 28, 2012 10:19 pm

Hey guys,

Sorry I have been MIA, I have been quite busy and starting a new job a few weeks ago has not helped much. I don't have access to solidworks just now to finish off the drawing to be laser cut but hopefully I can get that sorted soon. I have been speaking with a local company about perhaps taking on the project to supply all these as there is obviously going to be a little time involved in assembling and sending so many units, I will keep you informed as details are confirmed.

I just wanted to check in and let people know this is still on the cards, hopefully I can get it sorted fairly soon.

Cheers,

Tim

by **sailaholic** » Sun Jul 29, 2012 8:43 am

Hit Plohl up for solid works, I'm sure he'd do the drawing if that's what is needed.

Sent from my GT-I9100 using Tapatalk 2

by **plohl** » Sun Jul 29, 2012 11:36 am

yeah - i could fix it up at some point

by **sabretooth** » Sun Jul 29, 2012 10:26 pm

I'm late to the party, but are you still taking EOIs on these?

by **zoomzoom** » Mon Jul 30, 2012 9:03 pm

Sure Geoff, the more the merrier ;-). We will confirm the list before taking orders anyway, hopefully no one is in too much of a hurry. Sorry again, I will try to get what I have through by the end of the week to the other party who will be involved, so he can go ahead hopefully with a little more haste than myself.

Cheers,

Tim

by **manga_blue** » Mon Jul 30, 2012 10:50 pm

jerrah wrote:Note for those using the 'generic' coils. I have a set of the ebay ones and one has failed within 1000km.

I've called a few wreckers and genuine 2nd hand Toyota ones seem pretty easy to get around the $100 mark.

Toyota/Denso part numbers:

90080-19015
90919-02239
90080-19023
90919-02234

Yes, One of my ebay ones just failed too at around 1,000km. :evil:

If you're feeling ambitious ........ http://auctions.search.yahoo.co.jp/sear ... UTF-8&b=21

by **sabretooth** » Wed Aug 01, 2012 9:28 pm

zoomzoom wrote:Sure Geoff, the more the merrier ;-). We will confirm the list before taking orders anyway, hopefully no one is in too much of a hurry. Sorry again, I will try to get what I have through by the end of the week to the other party who will be involved, so he can go ahead hopefully with a little more haste than myself.

Cheers,

Tim

Sweet, no worries. No rush here.

by **rascal** » Thu Aug 02, 2012 10:56 am

manga_blue wrote:
jerrah wrote:Note for those using the 'generic' coils. I have a set of the ebay ones and one has failed within 1000km.

I've called a few wreckers and genuine 2nd hand Toyota ones seem pretty easy to get around the $100 mark.

Toyota/Denso part numbers:

90080-19015
90919-02239
90080-19023
90919-02234
Yes, One of my ebay ones just failed too at around 1,000km.

I also started with generic ones off ebay and one failed within the first 50km.
Went to the wreckers and bought 4 second hand toyota ones and haven't had any further issues in 12mths and 3000km, which included 10 track days..